NEW: ino tools for command line compiling and uploading sketch;

ino/Makefile

+PY := 2
+VENV := .venv
+
+all: help
+
+help:
+	@ echo "USAGE"
+	@ echo ""
+	@ echo "    make apt-install    --  Uses apt to install system tools"
+	@ echo ""
+	@ echo "    make setup          --  Install Python requirements"
+	@ echo ""
+	@ echo "    make build          --  Compile the sketch"
+	@ echo ""
+	@ echo "    make upload         --  Send the compiled sketch to the board"
+	@ echo ""
+	@ echo "    make serial         --  Starts a picocom serial communication"
+
+apt-install:
+	sudo apt-get install python-pip picocom
+	
+setup: clean-venv
+	@ echo "-------------------------------------------------------"
+	virtualenv -v --python='python${PYVER}' ${VENV}
+	@ echo "Virtualenv with 'python${PYVER}' interpreter was created at ${VENV}"
+	@ echo "-------------------------------------------------------"
+	${VENV}/bin/pip${PYVER} install --upgrade pip
+	@ echo "-------------------------------------------------------"
+	${VENV}/bin/pip${PYVER} install -r requirements.pip
+	@ echo "-------------------------------------------------------"
+	@ echo "Virtualenv is ready at ${VENV}!"
+	@ echo " "
+	@ echo "TOTAL SIZE: "
+	@ du -sh ${VENV}
+
+clean-venv:
+	rm -rf ${VENV}
+
+clean:
+	rm -rf .build src/*
+
+build:
+	rm -rf src/*
+	cp -rf ../meteorolog/. src/
+	${VENV}/bin/ino build
+
+upload:
+	${VENV}/bin/ino upload
+
+serial:
+	${VENV}/bin/ino serial -- -c
+

ino/ino.ini

+board-model = uno
+serial-port = /dev/ttyACM0

ino/requirements.pip

+ino

logger/Makefile

-PY := python3
+PY := 3
 VENV := .venv
 
 all: help
@@ -6,7 +6,7 @@ all: help
 help:
 	@ echo "USAGE:"
 	@ echo ""
-	@ echo "    make deb-install -- Uses apt to install required system tools"
+	@ echo "    make apt-install -- Uses apt to install required system tools"
 	@ echo "                        (for Debian-based systems only)"
 	@ echo ""
 	@ echo "    make setup       -- Create a local Python virtual environment"
@@ -22,20 +22,18 @@ help:
 	@ echo ""
 	@ echo "    make tail-exec   -- Follow the logger's execution.log"
 
-setup: venv
-
 apt-install:
-	sudo apt-get install python3 python3-pip supervisor
-	sudo pip3 install virtualenv
+	sudo apt-get install python python3-pip supervisor
+	sudo pip${PYVER} install virtualenv
 
-venv: clean-venv
+setup: clean-venv
 	@ echo "-------------------------------------------------------"
-	virtualenv -v --python='${PY}' ${VENV}
-	@ echo "Virtualenv with interpreter '${PY}' was created at ${VENV}"
+	virtualenv -v --python='python${PYVER}' ${VENV}
+	@ echo "Virtualenv with 'python${PYVER}' interpreter was created at ${VENV}"
 	@ echo "-------------------------------------------------------"
-	${VENV}/bin/pip3 install --upgrade pip
+	${VENV}/bin/pip${PYVER} install --upgrade pip
 	@ echo "-------------------------------------------------------"
-	${VENV}/bin/pip3 install -r requirements.pip
+	${VENV}/bin/pip${PYVER} install -r requirements.pip
 	@ echo "-------------------------------------------------------"
 	@ echo "Virtualenv is ready at ${VENV}!"
 	@ echo " "
@@ -46,13 +44,13 @@ clean-venv:
 	rm -rf ${VENV}
 
 run:
-	sudo ${VENV}/bin/python3 logger.py
+	sudo ${VENV}/bin/python${PYVER} logger.py
 
 deploy:
-	sudo ${VENV}/bin/python3 deploy.py
+	sudo ${VENV}/bin/python${PYVER} deploy.py
 
 undeploy:
-	sudo ${VENV}/bin/python3 deploy.py -u
+	sudo ${VENV}/bin/python${PYVER} deploy.py -u
 
 tail-exec:
 	tail -F logs/execution.log