NEW: structure refactor; commom pio Makefile usage; DEV: esplogger with...

NEW: structure refactor; commom pio Makefile usage; DEV: esplogger with arduino software serial suport tested

arduino/Makefile

-/home/nelso/devel/meteorolog/utils/pioman/Makefile
\ No newline at end of file

arduino/Makefile

+include ../utils/platformio/Makefile
+
+INOPROJECT = meteorolog
+
+BAUD = 9600
+BOARD = uno
+
+monitor: qtmonitor
+	#

esplogger/Makefile

-PORT :=
-BAUD := 115200
-
-PIOBOARD = nodemcuv2
-PIOPROJ = firmware/esplogger
-PIODIR = .pio
-
-.PHONY: firmware monitor reset getport
-
-all: firmware
-
-install-pip3:
-	wget https://bootstrap.pypa.io/get-pip.py && \
-		sudo python3 get-pip.py && rm get-pip.py
-
-install-platformio:
-	wget https://bootstrap.pypa.io/get-pip.py && \
-		sudo python get-pip.py && rm get-pip.py
-	sudo pip install platformio
-	$(MAKE) add-udev-rules
-	$(MAKE) add-dialout
-
-add-dialout:
-	sudo usermod -a -G dialout $$USER
-
-add-udevrules:
-	wget https://raw.githubusercontent.com/platformio/platformio/develop/scripts/99-platformio-udev.rules
-	sudo cp -v 99-platformio-udev.rules /etc/udev/rules.d
-	sudo service udev restart
-
-firmware: build upload monitor
-
-build:
-	which platformio || $(MAKE) install-platformio
-	@ echo "$$PIO_BUILD" | sh
-
-upload:
-	which platformio || $(MAKE) install-platformio
-	cd $(PIODIR) && platformio run -t upload
-
-monitor:
-	platformio device monitor
-
-reset: getport
-	@ echo "-----------------------------------------"
-	@ echo "Reseting the board"
-	esptool.py --port /dev/$(PORT) run
-	@ python -c "import time; time.sleep(1)"
-
-getport:
-	@ $(eval PORT := `python utils/getport.py`)
-	@ echo $(PORT)
-
-example-blink:
-	$(eval PIOPROJ := examples/blink)
-	@ echo "$$PIO_BUILD" | sh
-
-example-wifiscan:
-	$(eval PIOPROJ := examples/wifiscan)
-	@ echo "$$PIO_BUILD" | sh
-	$(MAKE) monitor
-
-example-sdcardinfo:
-	$(eval PIOPROJ := examples/sd_card_info)
-	@ echo "$$PIO_BUILD" | sh
-	$(MAKE) monitor
-
-help:
-	@ echo "$$HELP_MAKEFILE"
-
-clean:
-	rm -rfv $(PIODIR)
-
-define HELP_MAKEFILE
-Usage:  make <target>   where <target> can be:
-
-  firmware        Build and upload the esplogger firmware using platformio
-  monitor         Start the picocom serial monitor (autodetect port)
-  reset           Attempt a soft reset of the ESP devkit board
-
-  example-____    Build and upload one of the examples/ projects:
-                      blink      -- turn on and off the led on pin 2
-                      wifiscan   -- detect and print all available SSIDs
-endef
-export HELP_MAKEFILE
-
-
-define PY_GET_PORT
-import os
-ports = [x for x in os.listdir("/dev") if x.startswith("ttyUSB")
-									   or x.startswith("ttyACM")]
-if ports and isinstance(ports[0], str):
-	print(ports[0])
-else:
-	print("Error: Unable to find a ttyUSB/ttyACM serial port")
-	raise SystemExit(1)
-endef
-export PY_GET_PORT
-
-
-define PIO_BUILD
-	mkdir -p $(PIODIR)
-	rm -rf $(PIODIR)/src
-	platformio init --board $(PIOBOARD) -d $(PIODIR)
-	cp -rf $(PIOPROJ)/* $(PIODIR)/src/
-	cd $(PIODIR) && platformio run
-endef
-export PIO_BUILD

esplogger/README.md

-Purpose
--------
-
-Data logger firmware that runs on the ESP12e NodeMCU board connected an Arduino via software serial for sensor reading. This firmware is being designed to accomplish the following tasks:
-
-* Read sensor data from the Arduino board (established platform for plugging sensors);
-* Save the data locally onto an SD card;
-* Attempt to send the data onto the server (if fail, try again later);
-* Serial REPL (Read-Eval-Print-Loop) interpreter for sending commands;
-** Used on initial setup and debugging tasks;
-
-This software is part o the project EMM at CTA-UFRGS. See the official page for more details:
-http://cta.if.ufrgs.br/projects/estacao-meteorologica-modular/wiki/Wiki
-
-Usage
------
-
-The Makefile present on the root directory provide a quick commands for the most commom operations. Type "make" or "make help" for showing the help message. Some commands require external tools to be installed, like Platformio.
-
-The project firmware is under the "firmware/" directory and is ArduinoIDE-compatible. Alternatively you can build/upload it via terminal using "make firmware" command, that uses the excelent PlatformIO tool (use "make install-platformio" if not present).
-
-The examples folder contains several Arduino-IDE compatible little projects for demonstration of key features of the ESP12e.
-
-Development
------------
-
-The software is still on its early stages, so new functionality will be added frequently.
-

esplogger/examples/blink/blink.ino

-#include <Arduino.h>
-
-#define     LED_PIN  2
-#define     SLEEP_INTERVAL  500         // milliseconds
-
-void setup()
-{
-    Serial.begin(115200);
-    pinMode(LED_PIN, OUTPUT);
-}
-
-void loop()
-{
-    digitalWrite(LED_PIN, HIGH);
-    delay(SLEEP_INTERVAL);
-    digitalWrite(LED_PIN, LOW);
-    delay(SLEEP_INTERVAL);
-}
-

examples/arduino-bmp180/firmware/adafruit_bmp/Adafruit_BMP085_U.h → examples/adafruit-BMP180/Adafruit_BMP085_U.h

@@ -23,7 +23,7 @@
  #include "WProgram.h"
 #endif
 
-#include <Adafruit_Sensor.h>
+#include "Adafruit_Sensor.h"
 
 #ifdef __AVR_ATtiny85__
  #include "TinyWireM.h"

examples/adafruit-BMP180/Makefile

+include ../../utils/platformio/Makefile
+
+BAUD = 115200
+BOARD = uno

examples/arduino-bmp180/firmware/adafruit_bmp/adafruit_bmp.ino → examples/adafruit-BMP180/adafruit-BMP180.ino

@@ -2,7 +2,7 @@
 #include "Adafruit_Sensor.h"
 #include "Adafruit_BMP085_U.h"
 
-#define  BAUDRATE  9600
+#define  BAUDRATE  115200
 
 /* This driver uses the Adafruit unified sensor library (Adafruit_Sensor),
    which provides a common 'type' for sensor data and some helper functions.

examples/arduino-bmp180/firmware/Makefile

-/home/nelso/devel/meteorolog/utils/pioman/Makefile
\ No newline at end of file

examples/esp-blink/Makefile

+include ../../utils/platformio/Makefile
+
+BAUD = 115200
+BOARD = nodemcuv2

esplogger/examples/blink-ard/blink.ino → examples/esp-blink/esp-blink.ino

 #include <Arduino.h>
 
-#define     LED_PIN  2
+#define     LED_PIN         2           // NODEMCU D4
 #define     SLEEP_INTERVAL  500         // milliseconds
 
 void setup()

examples/esp-sdinfo/Makefile

+include ../../utils/platformio/Makefile
+
+BAUD = 115200
+BOARD = nodemcuv2

examples/esp-wifiscan/Makefile

+include ../../utils/platformio/Makefile
+
+BAUD = 115200
+BOARD = nodemcuv2

nodemcu/Makefile

+include ../utils/platformio/Makefile
+
+INOPROJECT = esplogger
+
+BAUD = 115200
+BOARD = nodemcuv2 		# from $ platformio boards esp8266
+
+#monitor: qtmonitor
+	#